General faucet installation method
When installing the ordinary faucet, we first need to take out the faucet fixing base, and rotate the nut from the threaded pipe. After the hose connecting the faucet and the water pipe is put on the stainless steel faucet fittings such as the threaded pipe and the silicone pad, it will be equipped with soft. The tube passes through objects that need to be installed, such as sinks, basins, and the like. At this point, it should be noted that the silicone pad that has been worn on the hose is installed on both sides of the sink, the basin, etc., and finally tightened to ensure that the base faucet is more stable. Then screw the small end of the hose into the water inlet of the faucet until it stops, no need to use other tools. After that, screw the nut tube into the lower side of the faucet, and the silicone pad on the upper side of the sink, basin, etc. can be removed and placed on the underside of the faucet. Finally, the faucet is fixed by fixing the faucet with a nut and screwing the nut.
Hot and cold water tap installation method
When installing the hot and cold water faucet, first arrange all the accessories, and make sure that the instruction manual is correct. We take the installation method of the hot-hot faucet as an example to introduce the specific installation steps. In the first step, the two inlet pipes of the cold water pipe and the hot water pipe are respectively connected to the corresponding water inlets of the hot and cold water faucet horses, and then after the connection is completed, the fixing columns of the hot and cold water faucets are put into the two water inlet pipes to ensure the corresponding cold. The heat is correct. After these operations are completed, the assembled hot and cold water taps need to be installed on objects such as sinks, washbasins, etc., and an inlet pipe is placed in an opening of the washbasin or the like. Finally, the horseshoe pieces of the faucet are fixed and the screw nut is tightened.
The above is the specific installation method of the ordinary faucet and the hot and cold water faucet. The installation of the faucet is different according to its function and installation orientation. After reading the above introduction, did you have a better understanding of the faucet installation?