First determine whether the water is small in the local outlet or in the whole house.
1. The whole house has a small amount of water
First determine if the total water valve in the home is not fully open.
Look at the neighbor’s water pressure whether there is the same problem, if it can be found in the property to discuss, it should be the problem of insufficient pressure on the high-level water supply (usually more than 10 layers need to be pressurized).
2. If it is a residential area without a property, the situation of insufficient water pressure can be improved by adding a pressure pump at the mainFirst determine whether the water is small in the local outlet or in the whole house.
(1). The whole house has a small amount of water
First determine if the total water valve in the home is not fully open.
Look at the neighbor’s water pressure whether there is the same problem, if it can be found in the property to discuss, it should be the problem of insufficient pressure on the high-level water supply (usually more than 10 layers need to be pressurized).
(2). If it is a residential area without a property, the situation of insufficient water pressure can be improved by adding a pressure pump at the main valve.
(3). Partial water outlet is small
Check that the angle valve is fully open to ensure complete opening. If the water volume is still small, remove the faucet outlet filter (bubble) and check for foreign objects.
(4). After confirming that the foreign matter is cleaned, if the water volume is still small, remove the angle valve to check for blockage.
(5). If there is any foreign matter, you need to use a toothbrush to remove the impurities and then use the detergent to wash away the mucous dirt from the drain. After cleaning, install the filter head back.
(6). After washing, the water output of the faucet is obviously increased.
If your faucet also has poor water supply,
Just clean up the filter head of the faucet.
3. Partial water outlet is small
Check that the angle valve is fully open to ensure complete opening. If the water volume is still small, remove the faucet outlet filter (bubble) and check for foreign objects.
4. After confirming that the foreign matter is cleaned, if the water volume is still small, remove the angle valve to check for blockage.
5. If there is any foreign matter, you need to use a toothbrush to remove the impurities and then use the detergent to wash away the mucous dirt from the drain. After cleaning, install the filter head back.
6. After washing, the water output of the faucet is obviously increased.
If your faucet also has poor water supply,
Just clean up the filter head of the faucet.